GlideTrak Assembly & Set Up
12
Seat Set Up Instructions
28
. Pick up the whole Seat Assembly and
orient the
seat
so that the Hip Pad is up and towards the
front of the GlideTrak (the taller end) and the Seat
Pad is up and toward the rear of the GlideTrak, as
seen in
Photo 15.
29.
Note that the posts of the Front Mid-Section and
Rear Mid-Sections have holes in them that face
inward on the GlideTrak.
These
holes are for
the Strap Hooks
on the front and back of the
Seat Assembly
. (
Photos 14 & 15
)
30. Locate the
Top Front Strap Hook
which
comes off the Seat Assembly at the top of the
Hip Post
. (Photo 16
)
31.
Being cautions not to step on the Straps, step
up onto the treadmill and stand beside the post
of the Front Mid-Section.
32. Note which hole on the Front Mid-section
post is at the level of your chin.
(Photo 16
)
33
. Insert the
Top Front Strap hook
into the hole
on the Front Mid-Section post that is at the level
of your chin.
(Photo 16
)
NOTE: It is easier to insert the Strap Hooks
into the holes if you turn the Strap Hook
sideways
. (Photo 16)
34
. The
Bottom Front Strap Hook
should then
be placed in the hole in the Front Mid-Section
post that is
2 holes below the Top Front
Strap Hook. (Photo 17)
Photo 16 Placing Front Top Strap
Hook at level of chin
Photo 17
Placing Strap Hooks in Holes
Front Mid-
Section
Post Hole
at level
of chin
Front Top &
Bottom Strap
Holes for
Hooks on
Front Mid-
Section
Post
Hook
