32
#12 MAINTENANCE
Bearing Maintenance:
The main bearing on your Glidecam HD-2000 is
attached to
the Central Support Post about two inches down from the top. It is metal and is partially
enclosed by the Bearing Assembly. If after some period of time your bearing doesn’t
turn smoothly, you can oil it lightly with light lubricating oil. We recommend that you
use very little oil. Very little, because this is all that is needed, plus anything more than a
little will end up coming out of the bearing and onto the rest of your Glidecam HD-2000.
Light lubricating oil may also be used if needed on the Yoke and Handle Bearings. Be
sure to keep the oil away from your Camera, and clean up any over spill when done.
Cleaning:
Do not use solvents or harsh cleaners of any kind on your Glidecam HD-
2000. If the unit becomes dirty, use only a cloth or sponge with water to gently rub the
unit clean.
Storage:
If you are going to store your Glidecam HD-2000 for a long period of time
then please store the unit upright in a dry or low to normal humidity area whenever
possible. If you are unable to find an environment like this, then we suggest you store the
unit in an air tight plastic container or bag. Standing the unit upright helps to alleviate
stress on the system.
#13 WARNINGS
You should make sure that you are very careful when using the Glidecam HD-2000 at
night or in low light conditions. Do not make the mistake of focusing so much on what
you are shooting that you trip or fall over something, or wander into something
dangerous like a swimming pool or automobile traffic. Be extra careful when shooting on
stairs, uneven terrain, etc. These cautions pertain to daytime shooting as well. Make sure
that all children using this product have adult supervision. If you plan on shooting while
moving fast, or while moving on uneven terrain, then be sure to wear knee and elbow
pads, eye protection and a helmut.
