20
If all is correct, your Camera and QUICK
RELEASE PLATE should now be securely
attached to each other as shown in Photo #35
NOTE:
If you can easily rotate the QUICK
RELEASE PLATE on the base of your Camera,
even though you have adequately tightened the
CAMERA MOUNTING SCREW, and you do
not feel comfortable tightening the CAMERA
MOUNTING SCREW any more, then you should
think about using some sort of
a flexible
“Gasket” between your Camera base and
QUICK RELEASE PLATE. You could use
rubber tape, or a square flat piece of rubber
(for example, creating one by cutting up an
old rubber dishwashing glove).
Now securely place and center your Camera
and the attached QUICK RELEASE PLATE
on the top of the CAMERA MOUNTING
PLATFORM as shown in Photo#36.
Make
sure the four knobs are pulled all the way
out before installing. Once the plate is
installed push the four knobs in and rotate
clockwise to securely tighten.
35
36
