PART THREE - OPERATION
SECTION 6 - TEST/MAINTENANCE
Rev. 2-300
Accu4™ Low-range Turbidimeter System
67
6.7 EPROM VERSION
Checking
6.8 SIM SENSOR Setting
☞
2.
Press
ENTER key
to view the sensor type screen.
3.
To return to the “TEST/MAINT” top-level menu screen,
press
ESC
or
ENTER key
.
You can check the version of EPROM used in the analyzer.
1.
With the
screen displayed, use
Ø
Ø
key
to select the “EPROM VERSION” line.
2.
Press
ENTER key
to view the EPROM version screen.
3.
To return to the “TEST/MAINT” top-level menu screen,
press
ESC
or
ENTER key
.
You can simulate a measured turbidity value to make the
relays and analog outputs respond accordingly.
1.
With the
screen displayed, use
Ø
Ø
key
to select the “SIM SENSOR” line.
2.
Press
ENTER key
to display a screen like
.
NOTE:
The value shown on this screen is now active,
providing a corresponding mA value for both
analog output signals. (The relays, depending
on their configured settings, may also respond
to this simulation value.)
