PART THREE - OPERATION
SECTION 4 - CONFIGURING THE ANALYZER
Accu4™ Low-range Turbidimeter System
Rev. 2-300
38
S
ECTION
4
☞
4.1 Selecting LANGUAGE
to Operate Analyzer
☞
4.2 Configuring
Sensor Characteristics
SELECT UNITS
NOTE:
When the passcode feature is enabled (Section
4.5), you must successfully enter the passcode
before attempting to enter a configuration setting.
The analyzer can display screens in various languages in-
cluding English, French (Français), German (Deutsche),
Spanish (Español), and others. The analyzer is factory-set
for English. To change languages:
1.
Press
MENU key
to display
&21),*85(
7(670$,17
(;,7
. Use
Ø
Ø
key
to select the “CONFIGURE” line.
2.
Press
ENTER key
to display
. Use
Ø
Ø
key
to select the “LANGUAGE” line.
3.
Press
ENTER key
to display a screen like
. Use
Ø
Ø
and
×
×
keys
to view the lan-
guage choices.
4.
With the desired language displayed, press
ENTER
key
to enter this selection.
NOTE:
After a language is selected and entered, all
screens will be displayed in that language.
You may want to configure the analyzer to define related
sensor characteristics such as units of measure, input sig-
nal filtering, pulse suppression, and a MEASURE screen
top line notation to specifically tailor the instrument to your
application.
The Accu4™ Low-range Turbidimeter System is factory
set to display turbidity in NTUs.
However, you may want
to select different measurement units:
CONFIGURING THE ANALYZER
