Page
22
of
34
CONNECTING TO 4-WIRE EQUIPMENT
The Beatrice R16 can be interfaced to a maximum of two traditional 4-wire systems.
To do this it is necessary to utilise the local audio inputs & local audio output circuits on
the R16 and route these to/ from one of the talkback channels via the audio over IP
network.
Example to make Talkback Channel 8 operate as a 4 wire circuit.
A)
In Dante
®
controller route local input 1 (Dante
®
transmitter no 17) to Dante
®
receiver no 8 (the audio input to channel 8)
B)
In Dante
®
controller route Talkback 8 output (Dante
®
transmitter no 8) to Dante
®
receiver no 17 (local output 1)
Summary of Contents for Dante BEATRICE R16
Page 2: ...Page 2 of 34...