Page
16
of
34
LOUDSPEAKER DIM LEVEL
The R16 has a loudspeaker dim circuit that automatically dims (reduces) the volume of
the loudspeaker when any talkback key is operated.
During initial test at the factory the DIM amount will have been set to the factory
default level. However it is possible to adjust this level should this be required.
To access the LS DIM level configuration menu then first start with the Beatrice R16
turned off.
1)
Hold down SPEAK TO ALL and SPEAK TO GROUP
2)
While holding down the above two buttons apply power and turn the unit on
3)
The two buttons can now be released and they will pulse to indicate that they
are in LS DIM programming mode
4)
Press the channel 1 speak key
5)
The LEVEL LEDs will now indicate the currently set DIM level
6)
The DIM LEVEL can be increased or decreased using the GAIN ADJUST control
7)
Turning the GAIN ADJUST control anti-clockwise will reduce the amount of DIM
that is applied when a speak key is pressed and turning it clockwise will increase
the amount of DIM that is applied.
8)
To leave the dim configuration menu just press either the SPEAL TO ALL or
SPEAK TO GROUP button and the R16 will reset and the DIM level will be saved
in non-volatile memory.
Summary of Contents for Dante BEATRICE R16
Page 2: ...Page 2 of 34...