Page
14
of
34
18.
Network RJ45s
There are 2 standard network data RJ45 sockets provided to allow redundant
network connectivity if using Dante
®
network audio protocol. They are both
gigabit network connections. The status LEDs flash to show when data is being
correctly communicated with the attached switch.
Either of network sockets can be connected to a Power Over Ethernet (PoE)
source to power the subrack. This PoE source can be a mid-span source or a
network switch with PoE. If a PoE source is present on both circuits then this will
act as a redundant power supply.
19.
Logic Inputs
This 15 pin ‘D’ connector socket provides connectivity to external switches or
devices for remote control of the talk keys and also provides inputs for cutting
the internal or external loudspeakers.
For further details see ‘WIRING’ at the rear of this manual.
20.
External Loudspeaker
This is a standard balanced analogue audio output for connection to external
loudspeaker amplifiers. The output level is adjusted by the front panel
Loudspeaker Volume control.
21.
Logic Outputs
This 25 pin ‘D’ connector plug provides outputs connected to solid state relays
that are activated when either any one of the speak keys is on (ideal for
connecting to external LS dim circuits) or individually when any call received
circuit is activated.
For further details see ‘WIRING’ at the rear of this manual.
22.
Local Outputs
These two line level analogue audio outputs are fed directly from two incoming
circuits from the Dante/ AES67 network.
23.
Local Inputs
These two line level analogue inputs are routed to two network audio output
circuits.
Summary of Contents for Dante BEATRICE R16
Page 2: ...Page 2 of 34...