Page
12
of
34
11.
Mic Select
This toggle switch selects which of the 2 microphones is to be used as the audio
source. If the switch is in the up position then the panel mic is used and if the
switch is in the down positon the external microphone input is used.
12.
Gain Adjust
This shaft encoder can be continuously rotated left and right and it also has a
built in switch which is operated by pushing it.
It is used in conjunction with the I/P GAIN or O/P GAIN illuminated buttons to
adjust the input/ output gain of the associated channel.
To adjust a channels input or output gain, simultaneously press and hold the
input (or output) gain button and also the talkback channel whose gain you
want to alter.
The level LEDs will then flash to indicate that you are adjusting a gain. Use the
rotary gain control to set the desired audio level and then press the gain control
to apply the setting and exit the gain setup.
13.
I/P Gain
Use this switch in combination with a channels’ talk key and the Gain Adjust
encoder to alter a channels input gain/ level. (see 12. Gain Adjust for more info)
14.
O/P Gain
Use this switch in combination with a channels’ talk key and the Gain Adjust
encoder to alter a channels output gain/ level. (see 12. Gain Adjust for more info)
15.
Speak Key
The 16 front panel speak keys allow the operator to talk to the 16 outgoing
talkback circuits. These talk keys can be set to work in different modes, see
SPEAK KEY CONFIGURATION for further information.
Summary of Contents for Dante BEATRICE R16
Page 2: ...Page 2 of 34...