Page 33 of 33
SPECIFICATIONS
NETWORK/ Dante®
Physical Interface
Transfer Rate
Audio
1 off RJ45 & 1 off SFP slot
(Can be set to work in redundant mode)
1000 Mbps
48kHz 24 Bit 8 channels to/from network
PHYSICAL
Mechanics
Shipping Size
Weight
Size
Shipping Carton
Shipping Weight
All aluminium with laser etched panels and
light textured black powder coated lid & base
62 x 42 x 12 cms
2.1Kg 4.85lb (fitted with 2 x party-lines)
19" wide, 1RU high, 225mm deep
Rugged export quality cardboard
3.5Kg 7.7lb
PARTY-LINE AUDIO
POWER
Mains Voltage
Mains Frequency
100 - 240 VAC +/-10%
50 to 60 Hz
INCLUDED ITEMS
Handbook
By download
2 metre Cat5 RJ45plug /RJ45plug cable
E & OE
Frequency Response
Signal To Noise @ Line Up
Line Up Levels (@ unity gain)
Gain Control
PPM LED Levels
Distortion (THD+N)
Network to Party Line <-2dB 230Hz to 8.1kHz (-3dB @ 200Hz & 9.1kHz)
Party Line to Network <-2dB 230Hz to 8.5kHz (-3dB @ 200Hz & 8.7kHz)
Network to Party-Line >= -80dBu (Pin 2)
Party-Line to Network >= -93dBFs (Pin 2)
-18dBFs from Network = -10dBu on Party-Line
-10dBu from Party-Line = -18dBFs on Network
+/- 15dB to & from Party-Line/ Network
Network to Party-Line >= 0.015% (Pin2)
Party-Line to Network >= 0.016% (Pin 2)
Power over Ethernet (PoE)
Consumption
Mains <150 Watts PoE <15 Watts
Redundancy
PoE to Mains = Seemless
Mains to PoE = Partial
(wet power not supported by PoE)
Dante® Chipset
Broadway
AES67 Compliant
AES67 compliant
Power On LEDs
Bright Blues
May be powered by PoE on Copper Port
Complies to: IEEE 802.3af-2003
Classification Class 0
ENVIRONMENTAL
Operating Temperature
0 to +50 C (32 to 122 F)
o
o
Storage Temperature
-20 to +70 C (-4° to 158 F)
o
o
Relative Humidity
0 to 95% non-condensing
Mains Cable
2 metre IEC (UK & Europe Only)
RJ45 Network Cable
SMPTE 2110-30 Compliant
2110-30 compliance via use of Dante Domain
Manager (licence fees apply see audinate.com)
PARTY-LINE GENERAL
Compatibility
Nulling Impedance Range
Power (Wet Mode)
Party-Line Impedance
Nulling Cable Length
Clear-Comm/ TecPro standard single channel
RTS standard single & unbalanced two channel
100 - 200 Ohms
Voltage: = 29 Volts DC
Max current: = 0.75 ampere (each party-line)
Dry mode: > 10 kOhms
Clear-Comm Wet mode: = 200 Ohms
RTS wet mode: 200/ 400 Ohms (selectable)
Max cable length: 1 km
From Network To Party-Line
From Party-Line to Network
-5 dBu
-12 dBFs
-11 dBu
-18 dBFs
-17 dBu
-24 dBFs
-25 dBu
-30 dBFs
Trans-Hybrid Loss
(amount of null in 200R termination)
Call Signals
RTS mode: 20 kHz, +/-1%
Clear-Com mode: 7 Volts DC on Pin 3, +/-5%
Maximum Signal Level
Pin 2 & Pin 3: = +7dBu
Pin 2 Dry Mode:
-53dB@300Hz, -53dB@1kHz, -56dB@8kHz
Pin 3 Dry Mode:
-56dB@300Hz, -60dB@1kHz, -63dB@8kHz
Pin 2 Wet Mode:
-47dB@300Hz, -48dB@1kHz,[email protected] -32dB@8kHz
Pin 3 Wet Mode:
-39dB@300Hz, -47dB@1kHz, -52dB@2kHz -46dB@8kHz
