LUCIA REAR PANEL LAYOUT
Mains & Ethernet
18.
IEC Mains
The standard IEC mains plug accepts external AC voltages of 100 -240 VAC +/- 10%
19.
Network RJ45
The Neutrik Ethercon network socket can connect to both Neutrik Ethercons
and standard RJ45 cables. It is a 1Gigabit standard IP network connection.
The status LED flashes to show when data is being correctly communicated
with the attached switch.
If connected to a Power Over Ethernet (PoE) source then the unit will be
powered from it
20.
USB connector and update buttons
The MINI USB connection allows the firmware of the LUCIA to be updated. To prepare the
LUCIA for a firmware update; power on the unit, press and hold down the reset button,
press and hold down the identify button, release the reset button and then release the
identify button a second after
21.
SFP Fibre Network Port
A standard SFP Fibre network interface module can be fitted into this port. SFP modules
are available in many different formats, if required Glensound can supply suitable SFP
modules, contact [email protected] for further information.
100-240V
50/60Hz 150 Watts
THIS UNIT MUST BE EARTHED
MADE IN THE UK
www.glensound.com
SERIAL No.
000
BEATRICE LUCIA
May be powered by PoE
USB
Dante ® Ethernet Interface
includes licence from Audinate Pty Ltd under
U.S. patent number(s) 7747725, 8005939,
7978696, 8171152 and other patents
IDENTIFY
RESET
y
UPDATE
issued, see www.audinate.com/patents
GIGABIT ETHERNET
If powered from PoE then Party-Line
wet power is not available
