LUCIA FRONT PANEL LAYOUT
LUCIA Front Panel Power
1.
PoE Power LED
This indicates that the unit is being powered by Power Over Ethernet (POE). In this mode the unit
cannot supply power (wet) to the party-line intercom.
2.
MAINS Power LED
This indicates that the unit is being powered by mains power. In this mode the unit is able to
supply power (wet) to the party-line intercom.
3.
Power Redundancy
If the Lucia is being powered from both PoE and Mains then if either power source is lost the
other will seamlessly take over. However as the PoE source cannot
provide wet power to the party-
line interfaces if the Lucia was supplying wet power
from mains and the mains supply is lost then
when switching over to PoE power the Lucia will automatically have to turn the wet supply to the
party-lines off.
4.
Party-Line Current Draw Indicator
This indicates how much of the total available power budget from the mains power supply (2
amps) is being used to power the party-line(s).
1 LED =
25%
2 LEDs =
50%
3 LEDs =
75%
4 LEDs =
100%
If all 4 LEDs are flashing then the total available current from the power supply is
being
exceeded and changes to the powering or number of devices on the party- line(s) need addressing.
CURRENT DRAW
POE
IF MAXIMUM
CURRENT
IS EXCEEDED
ALL LEDS
WILL
FLASH
MAINS
POWER
www.glensound.com
PARTY-LINE
WET POWER ONLY
AVAILABLE FROM MAINS
