Page 28 of 33
UPDATING FIRMWARE
Equipment needed
A windows based PC
USB Type A to Micro B cable
A copy of ‘DfuSe Demo’ software
The latest firmware from Glensound
A Beatrice B1/2 and a PoE source
Instructions
1.
Download and install DfuSE Demo
‘DfuSE Demo’ is a firmware updating tool that is required for loading new firmware
on to the STM32 Device.
It can be downloaded from the STMicroelectronics website found here:
It is the file named “STSW-STM32080”.
Once you have downloaded this file you will need to extract the .exe
“DfuSe_Demo_V3.0.5_Setup.exe”, then run and install it.
2.
Download firmware
The latest firmware for the Beatrice B1/2 can be found on the Glensound website,
under the respective product page. Once you have downloaded the file, place it in a
folder or location of your choice.
3.
Connect To A PC
Connect the Beatrice Lucia to the PC via the USB cable. The micro USB connector
is located on the rear panel of the Beatrice Lucia.
May be powered by PoE
USB
Dante ® Ethernet Interface
includes licence from Audinate Pty Ltd under
U.S. patent number(s) 7747725, 8005939,
7978696, 8171152 and other patents
IDENTIFY
RESET
y
UPDATE
issued, see www.audinate.com/patents
GIGABIT ETHERNET
If powered from PoE then Party-Line
wet power is not available
Figure 1 Example filename
Figure 2 USB connector
