AES67 MODE
The Beatrice uses a chipset from Audinate called the Broadway for its network audio
interface. Audinate are the company behind Dante and as such the primary network audio
protocol is Dante, however Audinate have enabled their chip to comply with AES67 and
therefore the Beatrice can be set to AES67 mode for interaction with other AES67 devices.
Please note however that Glensound are relying on Audinate’s AES67 interface and are
unfortunately not able to provide full AES67 support for the unit. AES67 support should be
sought directly from Audinate.
Turning On AES67 Mode
If you want to use your Beatrice on an AES67 network and it has not been set to AES67
mode then this can be set in Dante controller by double clicking the Beatrice to open the
Device View window where you will find an AES67 tab to enable AES67 support.
Once the AES67 drop down box has been enabled you’ll have to reboot the Beatrice for
the change to take effect. After the reboot go back to the AES67 tab and set the multicast
prefix address to one that is suitable for your newtork.
