14
Operation
The fireplace can be operated with the multi–function IR remote control or from the
control panel located on the right-hand side of the unit. The remote control has an
operating range of up to 4m / 13ft.
!
NOTE:
The heater on your fireplace may emit a slight, harmless odor when first
used. This odor is a normal condition caused by initial heating of internal heater
parts and will not occur again.
CUTOFF SWITCH
!
NOTE:
There is a safety temperature cutoff switch (cutout) inside the heater. If the
heater overheats, the cutout will shut off the supply power.
It can be reset by unplugging the unit and waiting 5 minutes before plugging the
unit back on.
CAUTION
:
If you need to continuously reset the heater, unplug the unit and call
technical service at 1-888-346-7539.
1. Power ON / OFF
2. Flame Control
3. Heat Control
4. Backlight Control
5. Timer Control
6. Digital Display
3
4
5
2
1
1
2
3
4
5
6
3
4
5
2
1
1
2
3
4
5
6
Summary of Contents for Dimplex SWM3520
Page 8: ...8 Package Contents Tools required x4 A x4 B x4 C x4 D 2 1 3 4 8 9 5 6 7 ...
Page 10: ...10 Installation 3 1 3 4 Wall 1 5 6 7 ...
Page 11: ...11 Installation 1 2 5 x2 C Wall TABLE TOP INSTALLATION 1 x4 D 8 ...
Page 12: ...12 Installation 2 3 x2 C Remove screw and save for step 3 Replace screw from step 2 9 ...