GAS COUNCIL NUMBERS
Natural Gas
Dimplex Combi 38 - Gas Council Appliance No: 447 149 01
Dimplex Combi 30 - Gas Council Appliance No: 447 149 02
Dimplex Combi 24 - Gas Council Appliance No: 447 149 03
2
© Dimplex Boilers 2008
APPROVED PRODUCT
17.0
BENCHMARK
© Dimplex Boilers 2008
47
VENTED CYLINDER COMMISSIONING CHECKLIST
This Commissioning Checklist is to be completed in full by the competent person who commissioned the
cylinder as a means of demonstrating compliance with the appropriate Building Regulations and should
remain attached to the cylinder for future reference.
Failure to install and commission this equipment to the manufacturer’s instructions may invalidate the
warranty but does not affect statutory rights.
Commissioned by (print name)
Company Name
Company Address
Telephone Number
Commissioning Date
To be completed by the customer on receipt of a Building Regulations Compliance Certificate*:
Building Regulations Notification Number
(if applicable)
ALL CYLINDERS
The vent pipe has been installed to BS6700/BS5449
Yes
What is the static head?
metres
Has an immersion heater been fitted?
Yes
No
If yes, does it have a non-auto resetting energy cut out?
Yes
No
Is the cold feed cistern supported in accordance with BS4213?
Yes
Is the cylinder solar (or other renewable) compatible?
Yes
No
All appropriate pipes including the vent pipe have been insulated
up to 1metre or the point where they become concealed
Yes
*
Where an installation is notifiable in England & Wales this will be made to Local Authority Building Control
(LABC) either directly or through a Competent Persons Scheme. A Building Regulations Compliance
Certificate will then be issued to the customer.
©Heating and Hotwater Industry Council (HHIC)
www.centralheating.co.uk
Commissioning Engineer’s Signature
Customer’s Signature
(To confirm satisfactory demonstration and receipt of manufacturer’s literature)
INDIRECT ONLY
A cylinder thermostat has been fitted in the recommended position
Yes
The hot water is controlled by a programmer or time switch
Yes
Is the system fully pumped?
Yes
No
Type of control system
Y Plan
S Plan
Other
18.0
WARRANTY TERMS & CONDITIONS
18.1
DIMPLEX 5YR WARRANTY
1.
Registration must be completed within 30 days of installation. Failure to return within 30 days will invalidate your warranty. Registration if
effected by returning the enclosed registration card to the commercial center of Dimplex at 5 Spartan Close, Tachbrook Park, Leamington Spa,
CV34 6RR. Proof of postage should be obtained.
2.
The Benchmark document must be completed by installer/householder at the time of installation and must be presented to our engineer at
subsequent visits.
3.
The boiler must be serviced annually, at the householders expenses in accordance with manufacturer’s instructions, and this service must be
booked through Dimplex by calling 0844 371 1121
4.
The service must be carried out by a Dimplex approved central heating engineer. Any work carried out by a non-Dimplex approved engineer
will invalidate this warranty.
5.
Appropriate system cleaning (e.g. power flush) and the correct use of additives must be carried out at the time of installation. Failure to
cleanse the system will invalidate this warranty. Evidence of cleansing should be presented to our engineer upon request.
6.
This warranty applies only to manufacturing problems with the boiler; damage caused through misuse, incorrect operation, foreign bodies in
the heating system, system faults and failures are not covered.
7.
This warranty applies only if the boiler is installed and used in accordance with the manufacturer’s instructions, in normal domestic
applications.
8.
Providing all the above Terms and Conditions are met, this warranty covers functional parts and labour.
9.
Dimplex offer the opportunity for a system audit and commissioning check within 30 days of registration. This is chargeable at the same rate
as an annual service and if taken up then the first annual service will be provided free of charge. Failure to take up this offer may invalidate
the full warranty which will revert to a standard 2 year warranty which will require an annual service In year 2 in any event.
10.
Failure to meet any of the above Terms and Conditions will invalidate this warranty.
48pp MANUAL SPREADS 19/10/10 08:36 Page 2
