gledhill PulsaCoil PCBP 120, Design, Installation & Servicing Instructions

Page: 7 / 28

Page 7
Appliance Dimensions
Model
Height
(A)
Width
(B)
Depth
(C)
PCBP 120 1131 560 605
PCBP 150 1332 560 605
PCBP 180 1533 560 605
PCBP 220 1734 560 605
B
E
C
PulsaCoil BP
Top up
cistern
Top up
cistern
300
*350
A
10
0
D
F
Maintenance
access
Figure 1.3
280
420
*Min maintenance
access to comply with
the Water Regulations
(ballvalve model only)
The minimum
clear opening in
front of the
appliance to be
at least the
same depth as
the appliance.
The cupboard door
opening will need
to take into
account the various
sizes of appliances.
Minimum Cupboard Dimensions
Model
Height
(D)
Width
(E)
Depth
(F)
PCBP 120 1881 600 620
PCBP 150 2082 600 620
PCBP 180 2283 600 620
PCBP 220 2484 600 620
Note: The Appliance dimensions above do not
allow for the100mm high installation base.
The following table of minimum cupboard
dimensions only allow the minimum space
required for the appliance (including the top up
cistern). Any extra space required for shelving
etc in the case of airing cupboards etc must
be added.
Note: The above dimensions are based on the
Appliance and the Top up cistern (fi tted with a
ballvalve) being in the same cupboard.
If the
manual fill model is chosen, the heights
shown above can be reduced by 125mm.
If pipework needs to rise vertically adjacent
to the appliance the width/depth will need
increasing to accommodate this.
DESIGN
TECHNICAL DATA