8
PRE-ASSEMBLE THE HEADER
:
STEP 7
. Slide the inner stops into the bottom channel in
the header with the square end facing the wall end of the
header. Slide the outer stops in the top channel of the
header near each end of the header. DO NOT TIGHTEN
THE SCREWS FOR STOPS AT THIS TIME.
H
H
STEP 8
. Install the header in the wall brackets, insert
the brack covers and tighten the set screws. Be sure the
header rest firmly on the bottom of the bracket and
that it is exactly level.
Detail 7A
Shows inside
of the Header
Detail 8A
Detail 8B
Detail 8C
Outer Door Roller Stops
Inner Door Roller Stops
Inner Door Roller Stops
to each end of the
header and tighten just
enough to hold in place.
Outer Door Roller Stops to
each end of the header and
tighten just enough to hold
in place.
Tighten
Set Screws
