background image

Revised 4/2019  

GLASSCRAFTERS, INC
193 Veterans Blvd., Carlstadt, NJ  07072

1+(888) 683-1362     (F) (201) 525-1117  
[email protected]

Cleaning Recommendations: 
Never use abrasive cleaners or cleaners 
containing ammonia. This may cause 
chemical damage .

For cleaning, we recommend using ammonia free
Sprayway brand glass cleaner, which is available
at a variety of retail outlets. 
www.spraywayinc.com/content/glass-cleaner

16

CLEANING INSTRUCTIONS

:

Never use scouring powder, pads or sharp instruments

on metal work or glass panels. We recommends the use

of a squeegee after each shower to eliminate water

spots on the inside of the glass panels. An occasional

wiping down on the glass panels an metal parts with a

mild detergent, diluted in water, is all that is need to

keep your Shower/Tub enclosure looking brand new.

Acero Series Models

Catalog Number               PSS- Polished Stainless Steel

BSS Brushed Stainless Steel

IBK Iron Black

ORB Oil Rubbed Bronze

Shower Enclosures

                                                      Metal Finish                       

AS-60T-38                                            PSS                              

AS-60T-38                                            BSS                              

AS-60T-38                                            IBK                               

AS-60T-38                                           ORB                              

AS-54T-38                                            PSS                              

AS-54T-38                                            BSS                              

AS-54T-38                                            IBK                               

AS-54T-38                                           ORB                              

AS-48T-38                                            PSS                              

AS-48T-38                                            BSS                              

AS-48T-38                                            IBK                               

AS-48T-38                                           ORB                              

Tub Enclosures

                                                      Metal Finish                       

AT-66T-38                                            PSS                              

AT-66T-38                                            BSS                              

AT-66T-38                                             IBK                               

AT-66T-38                                            ORB                              

AT-60T-38                                            PSS                              

AT-60T-38                                            BSS                              

AT-60T-38                                             IBK                               

AT-60T-38                                            ORB                              

NOTES:

Model Number…  ___________________________________

Dealer ________________________________________________

Job Log # _____________________________________________

Summary of Contents for ACERO AS-48T-38

















Reviews: