STEP 5 -- Set the Fixed Panel for position:
Place the clear Setting Blocks in the Bottom “U”
Channel, evenly space about 2” from each end. Do not
place on top of any of the screw heads. Two persons
should be used to lift the assembled Fixed Panel to fit
the panel in the Threshold and slide the panel into the
Vertical Wall Jamb.
STEP 6 -- Installation of the Horizontal Rail Wall
Mounting Brackets:
Check for level and Plumb position.
a) Using a pencil, mark the outline of both the left and
right Horizontal Rail Mounting Wall Brackets.-
b) Remove the assembled Fixed Panel with the
Horizontal Rail and lean against a wall outside of the
enclosure. Stand the glass on a carpet or padding to
protect the glass.
c) Loosed the set screw on the top and remove the
Mounting Brackets from the Horizontal Rail. Place the
Mounting Brackets in the outlines as marked on the
wall and mark for the screw locations. Drill the holes.
Use the proper bit for the enclosure
materials. Place a small amount of silicone sealant in
the holes and inset the plastic anchors. Screw the inner
Wall Brackets into place using the #8 1 1/4” flat head
screws (#22).
d) Assemble the Rollers on the Door. (The Anti- Lift
Standoffs are installed after the Door is installed on the
Rail.)
e) VERY IMPORTANT— MOVE THE ASSEMBLED DOOR
into the enclosure with the Rollers facing to the
outside of the shower. Place the glass door on a rug
or padding to protect the glass. (The side with the
holes for the Handle should be on the side opposite
the Fixed Glass Panel.)
f) Return the outer Mounting Brackets to each end of
the Horizontal Rail. Replace the Fixed Panel in position
in the Vertical Wall Jamb and Bottom “U” Channel. Slide
the outer part of both Horizontal Rail Mounting
Brackets flush to the wall over the inner portion as
mounted in the wall. Re-check for level and plumb and
fix into place with the set screws and Allen Wrench
provided.
9
DETAIL #6a -- Mark the positions for the
Horizontal Rail Mounting Wall Brackets
DETAIL #6b -- Inner portion of Horizontal Rail
Wall Mounting Bracket as affixed to the wall in the
marked positions.
DETAIL #5a -- Clear Setting Blocks
Check For Le
vel
Check For Plumb
