Replace an Empty Bottle
Notice: When your bottle is empty the dispenser will beep intermittently and the LED
nightlights will blink until a fresh bottle is connected.
You may also hear a sucking sound when the bottle empties. This is normal and is
another way to be alerted that your bottle is empty.
Replace empty bottle as soon as you notice it is empty. If unavailable, leave door ajar or
unplug cooler to stop beeping noise and flashing lights.
There may be a small amount of water left in the bottle. This is normal, if you need
assistance please contact customer service.
1. Open door and slide bottle out.
2. Remove probe from bottle:
•
Pull probe straight up until completely out of bottle.
3. Install fresh bottle:
•
Place fresh bottle in front of tray.
•
Clean fresh bottle with a soft cloth and warm soapy water then rinse.
•
Remove entire plastic cap from top of bottle.
•
Insert probe into bottle.
•
Push down on probe until it is seated.
•
Slide bottle onto tray and close door completely.
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 888-828-1426 for assistance.
11
