3
GKD Technik Ltd
M3000004
Operator Display Guide continued...
1
2
3
4
5
6
ALO Symbol
3RCI SpaceGuard Systems that are certified to work Adjacent Line Open will show
the symbol
“
ALO
√
”,
3RCI systems that are not certified to work Adjacent Line
Open, or approved systems without operational slew limits or virtual walls, will
show
“
ALO X
”.
In
-
gauge
Shows green when the machine is within gauge to travel. Will also show red
when a slew limit is exceeded or a height limit is exceeded.
Dig Mode
If the system is in dig mode this icon shows green and the motion cuts and
alarms on overload are disabled, the blue beacon is not illuminated.
Height
Height of lift point from ground level (road mode) or rail head (rail mode).
Active Lift
Point
The current active lift point is shown here. Possible options are
BP
(Bucket Pin),
ALP
(Auxiliary Lift Point),
QH
(Quick hitch), or
TLJ
(demountable Tele
-
jib).
If nothing shown here then only one lifting point is enable (Bucket Pin).
Radius
Radius of current lift point from the slew centre of the machine.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Load
Displays the current load on hook. This will include any attachments and the
quick hitch.
7