background image

7

INTRODUCTION

We thank you for purchasing one of our tyre changers, which are particularly suitable for mounting/demounting standard 

tyres and “run flat” tyres.

The machine is manufactured exploiting the best of quality principles.

To ensure correct operation and long life of the machine, all you need to do is follow these simple instructions, which 
shall be read and fully understood in every single part.

DETAILS OF THE TYRE CHANGER

When contacting our Service Department or when requesting spare parts, please provide a complete description of the 

Model of the tyre changer and its Serial Number.

For the sake of simplicity and commodity, the details of your tyre changer are written in the space below.

If the details given in this manual do not match those written on the nameplate of your tyre changer, those written on 
the nameplate are the ones to be considered valid.

NAMEPLATE DETAILS:

DETAILS OF THE MANUFACTURER

DATI DI TARGA:

  This manual is an integral part of the machine.

Before you use the tyre changer, read the warnings and instructions given in this manual carefully and 

thoroughly, because they provide important information on safe use and maintenance.

Keep this manual with care for future consultation

NOTE: some of the illustrations shown in this manual have been taken from pictures of prototypes.

Consequently, some parts or components of the machines of standard production may differ from what is 

illustrated.

Summary of Contents for Crossage



















































Reviews:

Related manuals for Crossage