GIULIANO Crossage, Use And Maintenance Instruction Manual

Page: 26 / 50

26
Fig. 18
-Position the tyre horizontally on the rim, slightly tilted downwards to the “3 o’clock” position.
-Lower the upper bead breaking disc (using button F) until the latter pushes the upper bead of the tyre by approxima-
tely 30 mm. (fig. 17)
-Press the rotation pedal (L) to turn the tyre clockwise by 360°
-Manually press the tyre in the “5 o’clock” position until the bead is
forced to the height of the channel and keep pressing it until it re -
aches position 8 after turning, so that the tyre does not lift while it
turns; continue to turn the tyre until the upper bead has fitted com-
pletely in place.
ATTENTION: Make sure the tyre and the rim move together as one.
NOTE: If you have difficulties in manually accompanying the bead,
you can use the mobile bead presser in the “5 o’clock” position (fig.
17 and 18)
Fig. 17
Make sure the bead of the tyre rests on the “shoe” shaped part of the
tool and under the grub screw in the opposite part of the tool.
Fig. 15
Fig. 16
Make sure the bead of the tyre rests on the “shoe” shaped part of the
tool and under the grub screw in the opposite part of the tool.
-Press the rotation pedal (L) to turn the tyre clockwise by 360°
-Manually press the tyre in the “5 o’clock” position until the bead is forced to the
height of the channel and keep pressing it until it reaches position 8 after turning,
so that the tyre does not lift while it turns; continue to turn the tyre until the lower
bead has fitted completely in place.
-Make sure the upper bead does not get between the rim and the bead breaking
disc.
ATTENTION: Make sure the tyre and the rim move together as one.