GIULIANO Crossage, Use And Maintenance Instruction Manual

Page: 14 / 50

14
6.0_SAFETY DEVICES
The tyre changer is equipped with safety devices that are designed to guarantee the safety of the machine operator:
- Pneumatic safety valve, arranged inside the machine that prevents the pressure from exceeding 4 bar during inflation.
- Pressure regulator and gauge that limits the maximum pressure of the circuit to 10 bar.
- Maximum tank pressure valve, fitted on the tank, to prevent the maximum pneumatic pressure from exceeding 11
bar (optional beak inflator 446/08)
- Removal or tampering with the safety devices provides grounds to immediately annul the warranty and
represents a breach of European Safety Standards.
7.0_TRANSPORT
- The tyre changer is to be transported in its original packaging and kept in the position indicated on the actual
packaging.
- The packed machine is to be moved using a forklift truck of suitable load-bearing capacity, inserting the forks in
the points indicated in the drawing below (fig. 1).
8.0_UNPACKING
Remove the cardboard and the securing screws, then take the machine off the original pallet.
Check the integrity of the equipment, making sure no parts are visibly damaged or missing, referring to the illu -
stration on page 12.
In the case of doubt, do not use the machine but contact your dealer.
Packaging elements must not be left at children’s reach because they could be dangerous. Put the packaging
material in dedicated waste collection areas if they are pollutant or non-biodegradable.
NB. Seeing as the more delicate parts are covered with special rust inhibiting oil, feasible traces of dirt are not
due to negligence but are just leftovers of this oil. Clean if necessary.
Gross weight 455 Kg.
Net weight 405 Kg.
WATER
extin -
guisher
FOAM ex -
tinguisher
POWDER
extin -
guisher
CO
2
extin -
guisher
DRY materials OK OK OK OK
FLAMMABLE
liquids
NO OK OK OK
ELECTRICAL
equipment
NO NO OK OK
fig. 1 fig. 2