18
Swiss Lifting Solutions
We,
GIS AG, Swiss Lifting Solutions, Luzernerstrasse 50, CH-6247 Schötz
hereby declare that the partly completed machinery
GIS crane components, model series
GKU
with a load capacity of
up to 5000 kg
developed for transporting loads and intended to be integrated into a machine, meets the essential requirements of the
following EC directive, insofar as applicable to the scope of the delivery:
EC Machinery Directive
2006/42/EC
We also declare that the technical documentation has been compiled in accordance with Annex VII, Part B of Directive
2006/42/EC. We undertake to submit the specific documents relating to the crane components to national authorities on
receipt of a reasonable request. The information will be supplied by electronic means.
Harmonised standards applied:
EN ISO 12100
Safety of machines; General design guidelines; risk assessment and risk reduction
Standards and technical specifications applied:
EN 13001-1
Cranes; General design; Part 1: General principles and requirements
Accident prevention regulations
This declaration refers only to the crane components. Start-up is prohibited until it has been proven that the
crane into which the components are integrated corresponds with the above EC Directive.
Authorised to compile relevant technical documentation:
GIS AG, Luzernerstrasse 50, CH-6247 Schötz
Schötz, 20.01.2021
GIS AG
I. Muri
E. Widmer
Director
Sales Manager
Declaration for the incorporation of an incomplete machine in accordance with the EU directive 2006/42/EC, Annex II B
5.2 EC Declaration of incorporation
