6.2 Parameter list
Settings window
Device settings
Parameters
Setting options, Basic
setting
Explanations
Manual commissioning
On, Off
Basic setting: On
Blocks manual commissioning
for the device channel.
Note: In the "Off" setting, the
device cannot be reset to the
factory setting.
Repeater mode
On, Off
Basic setting: Off
In addition to its other
functions, the device can be
used as a repeater. In the
"On" setting, the device
repeats all the received
telegrams.
Settings, channel
Parameters
Setting options, Basic
setting
Explanations
Manual commissioning
On, Off
Basic setting: On
Blocks manual commissioning
for the device channel.
Note: In the "Off" setting, the
device cannot be reset to the
factory setting.
Operating mode
Normal operation
Continuous on
Continuous off
Basic setting: Normal
Operation
Normal operation
The output can be operated
with radio transmitters and the
Prog
button.
Continuous on
The output switches to
continuously "On". All
operations of radio
transmitters and the
Prog
button are ignored.
Continuous off
The output switches to
continuously "Off". All
operations of radio
transmitters and the
Prog
button are ignored.
Local Operation
On, Off
Basic setting: On
Blocks the output for operation
using the
Prog
button.
Manual switch-off of the run-
on time
On, Off
Basic setting: Off
Allows manual switch-off of a
running run-on time. If the
parameter is switched off, then
a switch-off command will also
switch the actuator on. This
parameter is directly
connected to the "Run-on
time" parameter.
32581002
10499448
13.03.2014
6/11
eNet
Radio control unit 1-10V, 1-gang Mini