![background image](http://html1.mh-extra.com/html/gima/rescue-230/rescue-230_user-manual_2228085023.webp)
23
The
F4
key enables the clock set-up. With the
F3
key choose the value to change and with the
F2
key you can modify the value.
To exit the clock set-up press again the
F4
key.
Pressing the
F1
key the ECG monitoring will start.
Set-up menu
The set-up menu enables to preset the start up (at switch on) parameters of the
RESCUE 230.
To access the set-up menu, press the MENU key twice to reach the second menu, then
press F2 key (SET-UP).
Set-up menu fields:
ALARM HR MAX : the maximum heart rate for alarm (equal or higher). Maximum
settable value is 250 Bpm.
ALARM HR MIN : the minimum heart rate for alarm (equal or lower) . Minimum settable
value is 20 Bpm.
ALARM SpO2 MIN : the minimum SpO2 % for alarm(equal or lower). Minimum settable
value is 65%.
PRINT MODE: manual or automatic.
HPASS FILTER: High pass filter ON/OFF.
LPASS FILTER: Low pass filter ON/OFF.
NOTCH FILTER : 50/60Hz Notch filter ON/OFF.
TRACE SPEED : 5mm/s, 12.5mm/s or 25mm/s.
SAVE SET UP : Will save all the above values for the next switch on.
To change the set-up menu values use the F4 key (SELECT) to highlight the field and the
F3/F2 keys to change the value of the selected field.
To save the values for the next switch on, select the SAVE SET UP field and press either
F2 or F2 key. The message ‘SAVED’ will be displayed.
If the values are not saved, they will remain active only for the actual operating session
(until the device will be shut off).
To exit the set-up menu press the F1 key (EXIT).