![background image](http://html1.mh-extra.com/html/gima/rescue-230/rescue-230_user-manual_2228085019.webp)
19
Device Preparation
Unpacking
1)
Carefully inspect the packing container and the device for any damage that might have been
sustained during shipping.
2)
Check the shipping list to ensure that the unit comes with the complete accessories.
How to test the defibrillator
Only for the defibrillator testing it is possible to charge from the front panel or the standard
paddles and discharge internally. If the defibrillator is charged using this mode the maximum
energy will be
50J.
It is strongly advised
not to charge the defibrillator when the paddles are not attached to the
patient. In this case when attaching the paddles after charging in the testing mode the maximum
energy of the shock will be only
50J
independently of the energy preset on the front panel
Defibrillation pads connectors plug-in
Push the connector (STERNUM-APEX) up to the end and turn it right until it locks.
To unplug the connectors, pull the connector lever and turn it left up to the stop and then pull it
out.
PADS CONNECTUORS INSERTION
It is important to have all the necessary accessories all the time. Make sure
that you have the complete accessories during unpacking.