background image

DIATERMO 106

 

GIMA SpA

 

Manuale d’istruzioni / Instruction’s Manual / Manual de Instrucciones 

MA126IGBEa  

3

 

IMPORTANTE / IMPORTANT / IMPORTANTE 

Queste istruzioni operative costituiscono una parte fondamentale dell’apparecchiatura per chirurgia ad 
alta frequenza, in quanto ne descrivono il funzionamento e l’uso, pertanto devono essere lette 
attentamente prima di iniziare l’installazione e l’uso dell’apparecchiatura. 
Tutte le istruzioni di sicurezza o note di avvertimento devono essere osservate. Siate certi che queste 
istruzioni operative siano fornite insieme all’apparecchiatura quando è trasferita ad altro personale 
operativo. 
Nessuna parte di questo documento può essere fotocopiata, riprodotta o tradotta in un'altra lingua senza il 
consenso scritto della LED SpA. 
In caso di necessità di Assistenza Tecnica, contattare il proprio rivenditore. 
 

These operating instructions form an integral part of the equipment and must be available to the 
operating personnel at all times.  
All the safety instructions and advice notes are to be observed. Be sure that these operating instructions 
is furnished together the equipment when this is transferred to  other operating people. 
No part of this document could be photocopied, reproduced or translated in other language without the 
written consent of LED SpA. 
In case of necessity of technical assistance contact your own retailer. 

 

Las presentes instrucciones operativas forman parte indisoluble del equipo y han de estar a disposición 
del personal que lo utiliza, en todo momento. 
Todas las instrucciones de seguridad y las notas de advertencia se han de cumplir al pie de la letra.  
Cerciórese de que estas instrucciones operativas se adjunten al aparato, si el mismo es utilizado por otros 
miembros del personal operativo. 
Queda terminantemente prohibida la reproducción del presente Manual, mediante fotocopia u otros 
medios, así como su traducción a otros idiomas, sin la autorización previa y por escrito. 
De necesitar asistencia técnica, contacte a su revendedor.

 

 
 

 
 
 
 
 
 
 
 
 
 

Produttore / 

Manufacturer

 

 

LED

 SpA

 

PROGETTAZIONI E PRODUZIONI ELETTRONICHE 

Via Selciatella, 40 04010 APRILIA (LT) ITALIA 

Summary of Contents for DIATERMO 106


















Reviews: