Impulse sealer GIMA D 351
9
pict. 7
12
sealing bar
13
sealing bar fixing screw
14
glass-PTFE fixing washer
24
glass-PTFE protective cloth
25
resistance
26
sub-resistance band
27
socket
28
resistance fixing screw
29
compensation spring
30
resistance supply cable
4) upper mobile bar protections replacement
The protective cloth (n° 31 fig. 8 ) and the pressure rubber (n° 32 fig. 8 ) of the upper mobile bar
(n° 16 pict. 8 or n° 7 pict. 2) could consume or damage.
For the replacement proceed as follows:
a) extract the cutter knob (n° 4 pict. 2) in vertical direction
b) remove the pivoted plain cover (n° 3 pict. 2) after unscrewing the two screws (n° 5 pict. 2)
c) remove the upper mobile bar (n° 16 pict. 8) after unscrewing the two fixing screws (n° 20 pict. 10) Check
the protective cloth and pressure rubber conditions and , if necessary, replace them
d) during the fit back, check that the upper mobile bar will be aligned and parallel with the lower sealing bar ,
before to tighten its screws.(n° 20 pict. 10)
25
14
14
24
26
13
12
29
27
28
30
