Impulse sealer GIMA D 351
10
pict. 8
16
upper mobile bar
32
pression rubber
31
glass-PTFE protective cloth
33
bar fixing screw
5) cutter blade replacement :
The cutter group blade has a time-life . For the replacement proceed as follows :
TAKE MUCH CARE NOT TO HURT YOURSELVES WITH THE KNIFE
a) extract the cutter knob (n° 4 pict. 2) in vertical direction
b) remove the pivoted plain cover (n° 3 pict. 2) after unscrewing the two screws (n° 5 pict. 2)
c) Move the cursor (n. 34 pict 9) totally on the left and remove it from its place on the top (see pict. 10)
d) Remove the knife (n. 35 pict 9), loosing the fixing screws (n. 36 pict 9).
e) the blade has four sharps : check if one of them is working too. On the contrary replace the blade.
f) fit back on the contrary
pict. 9
17 knob
36 blade fixing screw
34 cursor
37 plate
35 blade
38 guide support