Impulse sealer GIMA D 351
5
THE SEALING TIME HAS TO BE SET ACCORDING TO THE SPECIFICATIONS OF THE
BAG TO BE SEALED AND THE DESIRED OUTPUT.
A comparative electronic control limits the heating of the resistance to avoid any overheating in case of fast
sealing sequence.
WE SUGGEST YOU TO KEEP AN OUPUT OF 6/7 SEALS PER MINUTE.
pict. 4
1 : led cooling phase
3 : sealing time adjustment knob
2 : led sealing phase
4 : sealing phase alarm led
SUGGESTED SEALING TIME
The DN 350 S is equipped through a electronic matching system that limits the sealing wire heating during its
use to avoid high heating storing up in case of rapid sealings sequence. Than the set time about the a) case is
suitable only for the first and/or second sealing.
a) first sealing or long sealing intervals
FLAT BAGS:
potentiometer knob (n° 3 pict 4) in position 8/10 (*)
BAGS WITH GUSSET:
potentiometer knob (n° 3 pict 4) in position 8/10 (*)
b) sealing made in rapid sequence
FLAT BAGS:
potentiometer knob (n° 3 pict 4) in position 8/10 (*)
BAGS WITH GUSSET:
potentiometer knob (n° 3 pict 4) in position 8/10 (*)
(*) depending by the real supply voltage line
after the automatic re-opening of the sealing jaw, at the end of the cycle , we suggest to wait
for 4 or 5 sec. before doing the next seal, in order to get a max max output of 6/7 per
minute
4
3
2
1