FEATURES/BENEFITS
EV-2/07-
All dimensions rounded up to the nearest 1/8"
I
True Website: www.truemfg.com
I
Toll Free Number • 1-800-325-6152
I
Specifications subject to change without notice.
TG S
erieS
TG2HRT-2S-2S
TG1HRI-1S
TG1HRT89-1S-1S
• Powerfully provides holding temperatures
of 80°F to 180°F throughout the cabinet for
uniform, forced-air, heating.
• Low velocity fan(s) provided to assure even
temperature throughout cabinet. A vent is
located at the top of the cabinet for positive
humidity control.
• Heater - stainless steel for corrosion resis-
tance.
• Accepts roll-in rack (inboard castor) with
maximum dimensions of 27"W x 29"D x 66"H.
TG1HRI89-1S and TG1HRT89-1S-1S
accepts roll-in rack (inboard castor) with
maximum dimensions of 27"W x 29"D x 72"H
(supplied by others).
• 300 series stainless steel doors and rain-
shield (the finest stainless available).
• Anodized quality aluminum sides, bottom
and back.
• Anodized aluminum interior.
• Humidity control - 12" x 20" pan standard.
• Manual humidity control is a standard fea-
ture (turn counterclockwise to ventilate).
• Heavy gauge doors.
• Three rugged cam-lift hinges per door, life-
time guaranteed. Designed for easy product
access with a full 180 degree open capability
and stay open feature at 120 degrees.
• Heavy gauge stainless steel ramp standard
for each door.
• Foamed-in-place polyurethane high density
cell insulation (CFC Free).
• Exterior, color coded, temperature display.
• Lifetime guaranteed recessed door handles.
• Door locks standard.
• Incandescent interior lighting.
• Self-contained system.
• Wiper gaskets for positive seal, reversible.
• Interior bumpers protect cabinet walls from
abuse caused by roll-in carts.
• Field reversible door swing.
• Roll-thru heated cabinet designed to be rear-
loaded from prep area and front accessed.
† Depth does not include 4
1
/
4
" for ramps (each side).
* Height does not include 1" for system mechanical components.
‡ Requires 115/208-240/60 Hz, single phase, 3 pole, 4 wire circuit.
note: TG2HRT-2S-2S requires hard wiring.
† Depth does not include 4
1
/
4
" for ramps.
* Height does not include 1" for system mechanical components.
‡ Requires 115/208-240/60 Hz, single phase, 3 pole, 4 wire circuit.
note: TG2HRI-2S requires hard wiring.
r
oll
-i
n
h
eateD
C
abinets
Model
Swing
Doors
Cu.
Ft.
Watts
Crated
Weight
Cabinet Dimensions
L D† H*
SOLID DOORS
TG1HRI-1S ‡
1
37
2000
325
35 x 34
1
/
2
x 83
3
/
4
TG2HRI-2S ‡
2
75
4000
615
68 x 34
1
/
2
x 83
3
/
4
SOLID DOORS 89" HIGH
TG1HRI89-1S ‡
1
38
2000
385
35 x 34
1
/
2
x 89
r
oll
-t
hru
h
eateD
C
abinets
Model
Swing
Doors
Cu.
Ft.
Watts
Crated
Weight
Cabinet Dimensions
L D† H*
SOLID DOORS
TG1HRT-1S-1S ‡
2
37
2000
400
35 x 36
7
/
8
x 83
3
/
4
TG2HRT-2S-2S ‡
4
75
4000
706
68 x 36
7
/
8
x 83
3
/
4
SOLID DOORS 89" HIGH
TG1HRT89-1S-1S ‡
2
38
2000
500
35 x 36
7
/
8
x 89
True Heated Cabinets
are designed to hold
warm baked or cooked
food. Cabinets are not
designed to heat ambient
or cold product.
