4
INSTALLATION
In order to assemble the height measurer, the cursor should be positioned on the wall exactly at a
height of 2 metres in line with the surface base and, keeping the product compact, fix the small
plate using the relative pins. At this point the height measurer is ready for use.
OPERATION
In order to measure height simply take the cursor with one hand and pull it downwards until it
touches the head of the person to be measured, then simply read the measurement in
correspondence with the red bar in the window.
MAINTENANCE
The product has been designed to last a long time. We recommend that the instrument is cleaned
with a delicate detergent.
Periodically clean the tape height measure with a cloth dampened with disinfectant.
Pay particular attention to the slider.
GIMA WARRANTY CONDITIONS
Congratulations for purchasing a GIMA product.
This product meets high qualitative standards both as regards the material and the production.
The warranty is valid for 12 months from the date of supply of GIMA.
During the period of validity of the warranty, GIMA will repair and/or replace free of charge all the
defected parts due to production reasons. Labor costs and personnel traveling expenses and
packaging not included.
All components subject to wear are not included in the warranty.
The repair or replacement performed during the warranty period shall not extend the warranty.
The warranty is void in the following cases: repairs performed by unauthorized personnel or with
non-original spare parts, defects caused by negligence or incorrect use.
GIMA cannot be held responsible for malfunctioning on electronic devices or software due to
outside agents such as: voltage changes, electro-magnetic fields, radio interferences, etc.
The warranty is void if the above regulations are not observed and if the serial code (if available)
has been removed, cancelled or changed.
The defected products must be returned only to the dealer the product was purchased from.
Products sent to GIMA will be rejected.
ENGLISH
