Gilson Pipetman Ultra 12x20, User Manual

Page: 6 / 44

6
PIPETMAN
®
u
ltra
If the volume is unlocked for 15 sec, you will see
LOCKED/UNLOCKED fl ashing
during 10 min to warn you to
lock the thumbwheel.
If you have not locked the pipette, Pipetman
Ultra turns itself off after 10 min of inactivity.
Just lock the thumbwheel (volume setting) and
“Init 1” will appear.
Follow the instruc-
tions of Appendix to
reset the pipette.
5  VOLUME INDICATOR  LCD WINDOW
What you normally see...
Volume setting
Units (μL or mL)
Volume status (locked or
unlocked)
What may appear...
Calibration status: “RECAL” this means that your
pipette has been readjusted.
Battery status: failing – “LOW BATT” here, or failed
– “BATT” in place of volume setting.
Electronic counters:
Holding down the push button to the second stop
for 5 seconds, successively displays counters at the
right-hand side of an otherwise blank screen. Are
displayed in order:
a) Cycle counter since the last volume setting
– the counter indicates the
number of pipetting cycles
(max. 199); for example 126
cycles.
b) Cycle counter since the pipette was made – the
counter indicates the number of pipetting cycles
|
0 0
LOW BAT UNLOCKED RECAL
μ
l