8
QUICK GUIDE
| MyPIPETMAN®
Fitting the Tips
It is recommended to use PIPETMAN DIAMOND Tips with
MyPIPETMAN for optimum performance. These tips are
made from pure polypropylene. Plastic tips are for a single
application and should be disposed of after use—please do not
clean for reuse.
Single Channel Models
To fit a new PIPETMAN DIAMOND Tip, push the tip holder
into the tip using a slight twisting motion to ensure a firm and
airtight seal.
PIPETMAN DIAMOND Tip
Compatibility for Single Channel Models
P2, P10
D10, DL10, DF10ST, DFL10ST
P20
D200, DF30ST
P100
D200, DF100ST
P200
D200, D300, DF200ST, DF300ST
P1000
D1000, D1200, DF1000ST, DF1200ST
P5000
D5000
P10mL
D10mL
4
1
2
3
Multichannel Models
For P8x10 and P12x10 models, according to the tip used, either
D10 or DL10, you may have to fit the ejector adapter. Long
collar tips can be inserted without it.
1.
Remove the tip ejector, keep both ejector locks
depressed
1
, and then pull the tip ejector down
2
.
2.
Fit the ejector adapter
3
and click it to the tip ejector.
3.
To refit the tip ejector, gently re-insert the tip ejector
vertically into the rails of the ejector support
4
.
NOTE
Long tips can be used without tip ejector
adapter.
