T
R
OU
B
LE
S
h
O
O
TI
NG
13
MICROMAN E®
|
USER’S GUIDE
TROUBLESHOOTING
|
MICROMAN E®
Chapter 4
TROUBLEShOOTING
You may be able to identify and correct the
problem by referring to the following information.
If you cannot solve the problem, please contact
your local Gilson representative.
Leaks:
Replace the capillary piston.
No stroke:
The piston is not properly fitted into the clamp;
check that the piston is seated correctly (refer to
pages 8). Without any capillary piston, press the
push button to the first stop, and then press down
harder to the second stop.
Difficult to fit a capillary:
Clean the capillary holder with ethanol. Without
any capillary piston, press the push button to
the first stop, and then press down harder to the
second stop.
Inaccuracy:
Make sure the capillary is correctly mounted on
the capillary holder (refer to
ChApTER 2, FITTING
ThE CApILLARY pISTON
, pages 8).
Imprecision:
Replace the capillary piston.
Difficult to set the volume:
This suggests internal damage to the pipette.
Contact your local Gilson representative.
If the problem persists...
Contact your local Gilson representative.
Summary of Contents for microman e
Page 1: ...User s Guide EN E...
