- 12 -
1.
switch on the TrACKMAN.
2.
Press
Setup
; the timer symbol starts blinking.
3.
To change it, press
Modify
. Click
Valid
to confirm your choice. The next item, the beeper symbol,
starts blinking.
If you do not want to change it, press
Valid
, the beeper symbol starts blinking.
4.
if you want to switch the beeper on or off press
Modify
and then
Valid
to accept the selection.
If you do not want to change it, press
Valid
. Set the next item, the transport function, by using the
Modify
soft touch.
Press
Valid
to accept the selection and return to the operation screen.
5.
To exit the
Setup
menu, press
Quit
.
7
cLEAninG, dEcontAMinAtion And MAintEnAncE
cleaning and decontamination
To clean the TrACKMAN, wipe it with a
soft-cloth or lint-free tissue dipped in
a simple soap solution or 70% ethanol,
to remove all marks. if the TrACKMAN
is very dirty, a brush with soft plastic
bristles may be used.
To rinse, wipe the TrACKMAN with a
soft cloth or lint-free tissue dipped in
distilled water.
Allow it to air dry or dry it carefully with
a soft cloth or lint-free tissue.
if you use chemical solutions for decontamination or detergents for cleaning other than those speci-
fied below, you should check with your supplier that the solution or detergent is safe for use with the
following materials:
ABS (Acrylonitrile Butadiene Styrene), polyester, rubber and stainless steel.
Maintenance
The TrACKMAN must be cleaned regularly.
if necessary, you can replace the antiskid
rubber feet (refer to Chapters 4 and 9).
Cautions:
Do not autoclave TRACKMAN. Extreme heat
will damage electronic components.
Do not immerse the TRACKMAN; liquid inside
can damage its internal components.
Do not clean the keypad with bleach solutions
or other solvents. Caustic cleaning solutions
can damage the keypad.
Warning: The TRACKMAN may not be opened!
Repairs must be carried out by Gilson or
a service company authorized by Gilson!
Please contact your local Gilson Service for
the replacement of spare parts or battery.
Summary of Contents for F70301
Page 1: ...User s Guide...
