Gilson F70301, User Manual

Page: 13 / 16

- 13 -
User's GUide EN
8
trouBLESHootinG
in case of malfunction, first reset the
TrACKMAN. To reset, insert a paper clip
into the reset hole on the rear panel
of the TrACKMAN for at least 3 sec.
if the problem persists, you may
consult the following table which
identifies potential problems and
possible solutions.
Problem Possible Cause Refer to page
No LCD display. Recharge battery. 7
Reset the software. 5
No operation possible. Recharge battery. 7
Reset the software. 5
Step touch pads do not work. Set program to Manual mode. 10
Lift finger between clicks. 10
No activity after sleep mode. Reset the software.
5
Recharge battery. 7
No move of light sequence. Reset the software.
5
Battery needs recharging. 7
No operation possible.
Battery needs recharging. x
Software needs to be reset. x
Calibration impossible.
Software needs to be reset. x
9
rEPLAcEMEnt PArtS
Description Reference
Antiskid rubber feet 5462105001