Gill Instruments Ltd
_____________________________________________________________________________________________________________
________________________________________________________________________________________________
MaxiMet
Page 41
Issue 1
Doc. No. 1957-PS-000x
March 2015
AVGSPEED
Outputs WMO average speed reading based on AVG short and AVG long
settings.
AVGDIR
Outputs WMO average direction reading based on AVG short and AVG long
settings.
GSPEED
Outputs WMO Gust Speed.
GDIR
Outputs WMO Gust Direction.
AVGCDIR
Outputs WMO average corrected compass direction reading based on AVG
short and AVG long settings.
COMPASSH
Compass Heading reading.
The System Page
can be used to select:-
Power Mode
0
or 1, 0 is the default normal operation mode.
(1 is a future operating condition).
Date Time
Set/Read system Date/time. (YYYY-MM-DDTHH:MM:SS).
The PowerUp Page
can be used to select:-
Status Message Output
ON
or OFF.
E.g.
MAXIMET - GMX 600 1B 2669 V0.00.17
STARTUP: OK
RCON: 0120
WDT enabled
Voltage reg. active during Sleep
CRC: 6BB8
Report Message Output
ON
or OFF.
E.g.
NODE,DIR,SPEED,CDIR,PRESS,RH,TEMP,DEWPOINT,PRECIPT,PRECIPI,TIME,VOLT,STATUS,CHECK
Units Message Output
ON
or OFF
E.g.
-
DEG,MS,DEG,HPA,%,C,C,MM,MM/H,-,V,-,-
<END OF STARTUP MESSAGE>
