Gill MaxiMet GMX200, User Manual

Page: 33 / 67

Gill Instruments Ltd
_____________________________________________________________________________________________________________
________________________________________________________________________________________________
MaxiMet
Page 33 Issue 1
Doc. No. 1957-PS-000x March 2015
MetSet Editing Screen
When connected correctly a MetSet editing screen is available to read configuration settings,
change configuration settings, save MaxiMet configuration settings to a PC file location, upload
MaxiMet configuration settings from a PC file and view the MaxiMet raw data string output.
 MetSet Connection Status Information.
Reading Function
ONLINE ONLINE in green indicates the MaxiMet has been
successfully connected to MetSet.
OFFLINE in Grey indicates that MetSet is being used
without a MaxiMet in communication with MetSet.
19200 COM10 19200 is a report on the MaxiMet Baud rate setting.
COM 10 is a report on the MaxiMet COM Port
connection number.
S/W ver 2669-
0.00.20
2669 is the MaxiMet Firmware number.
0.00.20 is the firmware revision.
PV=1 is the Protocol Version (Gill Internal Reference).
Source:Device MetSet reads ‘Device’ when the source of the data
that MetSet has retrieved has come from the MaxiMet
and the MaxiMet Model.
MetSet reads ‘File’ when the source of data has come
from a saved file.
MetSet reports on the connected MaxiMet device
(MAXIMET) and reads the unit Serial Number (S/N:
XXXXXXXX)
Connection
Status
Source of MetSet
Data
MetSet Editing Screen
MaxiMet
Device Setting
Options
View MaxiMet
Raw Data
Output String
Serial Number
Move mouse over exclamation
or question marks to read
setting comment
Return to
opening MetSet
Screen