Gill Instruments HS-50 User Manual Download Page 32

Page: 32 / 69

Gill Instruments Ltd

UNCAL

Wind results are uncalibrated.

SOSREP

Syntax:

SOSREP OFF | SPEED | (SONICTEMP K | C)

Description: Sets the speed of sound reporting format.
Parameters: OFF

SOS reporting is turned off.

SPEED

SOS is reported as speed.

SONICTEMP

SOS is reported as sonic temperature.

Sonic temperature reporting in K.

Sonic temperature reporting in °C.

ABSTEMP

Syntax:

ABSTEMP OFF | (ON K | C)

Description: Enables and disables absolute temperature reporting from the PRT sensor.
Parameters: OFF PRT temperature reporting turned off.

PRT temperature reporting turned on.

PRT temperature reporting in K.

PRT temperature reporting in °C.

ANAIP

Syntax:

ANAIP <ipno>{,< ipno> }6 ( D | E )

<ipno> = 1 | 2 | 3 | 4 | 5 | 6

Description: Turns on or off the specified analogue inputs.
Parameters: ipno Analogue input channel number.
D

Disable

specified

channels.

Enable

specified

channels.

AOPFSD

Syntax:

AOPFSD 10 | 20 | 30 | 60

Description: Specifies the analogue outputs full scale deflection. Used to configure the

analogue output box only.

POLARWRAP

Syntax:

POLARWRAP 360 | 540

Description: Specifies the analogue outputs polar reporting wrap angle. Used to

configure the analogue output box only.

STRFMT

Syntax:

STRFMT BINARY | ASCII ( PAD | UNPAD)

Description: Sets the result message string format.
Parameters: BINARY

Binary result message format.

ASCII

result

message

format.

PAD

ASCII fields padded to fixed size.

UNPAD ASCII

fields

unpadded.

ASCTERM

Syntax:

ASCTERM CR | CRLF

Description: Sets ASCII output string terminator.
Parameters: CR

ASCII output string terminator is <CR>.

CRLF

ASCII output string terminator is <CR><LF>.

HS-50 Research Anemometer

Page 30

Issue 02

Doc. No. 1199-PS-0032

November 2004

Summary of Contents for HS-50






































































Search results

Summary of Contents for HS-50

Reviews:

Related manuals for HS-50

Brands by name

Popular brands

Gill Instruments HS-50, User Manual

Search results

Summary of Contents for HS-50

Reviews:

Related manuals for HS-50

Brands by name

Popular brands