Gill Instruments Ltd
6. USING THE ANEMOMETER WITH A PC RUNNING RCOM II
6.1 PC Requirement
Recommended: Windows 98, P166 or higher, 32 MB RAM.
6.2 Installing RCOM II
Insert the installation CD, click on the set-up icon and follow the displayed instructions.
6.3 Starting RCOM II
Select Start->Programs->RcomII
6.4 Using RCOM II
RCOM II is a Windows program, which offers a simple terminal for viewing HS-50 output and or
configuring the HS-50 using Interactive Mode. Refer to the Software Commands section for details
on the Interactive Mode command set.
Port Configuration: The serial communications port can be configured via the Terminal->Configure
Ports dialog. The port status is shown at the bottom of the application window.
Data logging: Output can be directed to a file using the Terminal->Open Log File. Once a log file is
open the option Terminal->Close Log File can be used to halt all logging.
HS-50 Research Anemometer
Page 22
Issue 02
Doc. No. 1199-PS-0032
November 2004
Summary of Contents for HS-50
Page 2: ......
