Gill Instruments Ltd
_____________________________________________________________________________________________________________
________________________________________________________________________________________________
WindObserver II Pipe Mount
Page 36
Issue 04
Doc. No. 1390-PS-0009
August 2009
10.4. Returning unit
If the unit has to be returned, it should be carefully packed in the original packaging and
returned to your authorised Gill distributor, with a full description of the fault condition.
10.5 . Status (error) codes
The Status code is sent as part of each wind measurement message.
Code
Status
Condition
00
OK
Sufficient samples in average period
60
OK and heating
enabled
Sufficient samples in average period
A
OK
NMEA data valid
01
Axis 1 failed
Insufficient samples in average period on U axis
02
Axis 2 failed
Insufficient samples in average period on V axis
04
Axis 1 and 2 failed
Insufficient samples in average period on both axes
08
NVM error
NVM checksum failed
09
ROM error
ROM checksum failed
10
System gain at max.
Inaccurate results likely
50
Marginal system gain
Results OK, but marginal operation
51
Measurement average building
62
Heating current tripped or electronic failure
63
Thermistor open circuit
65
Heating element open circuit
V
NMEA data invalid
10.6. Bench test
Couple the WindObserver II (Pipe Mount) to the host system and power supply, using a
known working test cable.
Check that the unit is correctly configured by going into Configuration mode and using
D3
See Section 9.3 Checking the configuration.
Check for normal output data, and that the Status Code is OK – 00, 60 or A (for NMEA
format).
If the status code is other than these, refer to Section 10.5 Status (error) codes.
Use an office fan or similar to check that the unit is sensing wind, turning the unit to
simulate changing wind direction and to check that both axes are functioning.
Note that this is a quick functional test. There are no calibration adjustments; the unit is
designed NOT to require re-calibration within its lifetime. Gill has provided and Integrity
Check, see next page for details.
陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备气象科学仪器设备
Tel:18966887800 Web:www.xavery.cn Email:[email protected]
