GILES FSH-2-PH, Manual

Page: 44 / 66

34
Operation
FSH-2-PH
4.04 E.A.C. Filter Cell Cleaning Timer Operation
The hood is equipped with a Filter Cell Cleaning Timer . This feature is intended to help users maintain a proper
cleaning routine for the sustainable E.A.C. Collector Cell . Timely cleaning is essential to ensure that the cleaning
system continues to effectively remove grease ­ laden cooking vapor particulate from the recirculated air.
After a preset period of time expires, the timer signals that it is time to clean the collector cell (or exchange it with a
clean standby cell, if available) . If action is not taken within the alloted time, a timeout error alarm occurs and
power to the fryer is disabled and remains locked ­ out until filter maintenance is performed. After necessary
maintenance is performed, the timer automatically resets, a fresh countdown begins and normal operation is
restored.
Should error/alarm occur during a peak demand period or while cooking is in progress, a SNOOZE feature is
provided to temporarily postpone shutdown and continue operation for a short period of time.
Timer indicators and [SNOOZE] control button are located on the hood control box panel.
① CHANGE SOON
The amber indicator turns ON when timer enters [WARNING] mode. If the
collector cell is cleaned (or exchanged) within the next 24 hours , timer
automatically resets and begins a new countdown. Normal operation will
continue without interruption.
② CHANGE NOW
The red indicator turns ON when timer enters [TIMEOUT] error mode, signaling
that allowed time between cleanings has expired. An audible alarm sounds,
and fryer power is
disabled . Power is locked out until cleaning (or exchange) is
completed. The hood [POWER] and [FRYER POWER] lights will turn OFF.
Placing Power Switch in the [OFF] position silences the alarm. Hood cannot be
restarted unless the timer is reset by cleaning the cell.
Timer Operation:
1
2
NOTE: Does not apply to unit with HEPA Filter.
③ SNOOZE Button
In the event that [TIMEOUT] occurs during a period of high customer demand
or while a cooking cycle is in progress, the SNOOZE feature may be used to
exit [TIMEOUT] mode. Pressing the [SNOOZE] button temporarily returns
timer to [WARNING] mode for a period of two (2) hours, allowing continued
operation.
Only two (2) snooze periods are available. When a second is used, the
[CHANGE SOON] light flashes to indicate this is the last snooze period. After
second period expires, fryer is once again locked ­ out until the E.A.C. cell is
cleaned (or exchanged) .
NOTE: [SNOOZE] Button is only active after the timer enters [TIMEOUT] mode
and the red [CHANGE NOW] light is ON.
3