Gilera Stalker 50, Service Manual

Page: 31 / 164

AGIP BRAKE 4 Brake fluid
FMVSS DOT 4 Synthetic fluid
Headlight adjustment
Proceed as follows:
1 . Place the vehicle in riding condition and with the
tyres correctly inflated on a flat piece of ground at
a distance of 10 m from a white screen situated in
a shaded area, making sure that the scooter is
perpendicular to the screen;
2 . Turn on the headlight and check that the edge
of the beam projected on the screen is not more
than 9/10 of the height of the centre of the head-
light from the ground, and not less than 7/10;
3 . If this is not the case, remove the hook by turning
the two screws, then remove the cover on the
shield back plate.
Adjust the headlight by turning screw " A ".
N.B.
THE ABOVE PROCEDURE COMPLIES WITH THE EURO-
PEAN STANDARDS REGARDING MAXIMUM AND MINI-
MUM HEIGHT OF LIGHT BEAMS. REFER TO THE STATU-
TORY REGULATIONS IN FORCE IN EVERY COUNTRY
WHERE THE vehicle IS USED.
Stalker 50
Maintenance
MAIN - 31