01_14
Immobilizer device enabled indicator led (01_14)
Activation of the
«PIAGGIO IMMOBILIZER»
system is signalled by a flashing «
G
»
warning light. In order to reduce battery discharge, the indicator LED turns off auto-
matically after 48 hours of uninterrupted functioning. Should the system fail, different
LED flashing patterns will provide the
Authorised Service Centre
with information
on the type of fault detected.
Operation
Every time the ignition key is removed in the "
OFF
" or "
LOCK
" position, the safety
system activates the immobilizer system. Turning the key to "
ON
" disables the engine
lock, provided that the safety system recognises the code transmitted by the key. If
the code is not recognised, turn the key first to "
OFF
" and then to "
ON
"; if the block
remains try again with the other brown key. If the engine cannot be started, contact
an
Authorised Service Centre
, which is provided with the electronic equipment re-
quired to detect and repair the system.
When additional keys are required, please note that data storage (up to 3 keys max.)
must be done on all keys, both new ones and existing ones. Bring the brown key and
all the red ones to an
Authorised Service Centre
. The codes of keys not submitted
for the new programming procedure are deleted from the memory. Any lost keys will
therefore not be enabled to start the engine.
WARNING
WARNING
EACH KEY HAS ITS OWN AND UNIQUE CODE, WHICH MUST BE STORED BY
THE SYSTEM CONTROL UNIT.
VIOLENT SHOCKS MAY AFFECT THE ELECTRONIC COMPONENTS OF THE
KEY.
18
1 Vehicle
Summary of Contents for Runner 125
