Safety Information
Page 6
MDE-3801 TRIND™ Multi 1 Transmitter/Receiver in Dispenser Retrofit Kit • 10/99
Before Beginning
Do the following:
Read all instructions before beginning.
Follow all safety precautions, including:
• Barricade work area.
• Do not allow vehicles or unauthorized people in work area.
• Do not use power tools in work area.
• Do not permit smoking or open flames in work area.
• Wear protective gear while performing this installation.
Record all mechanical and electronic totals.
Turn off all power to unit, unit lights and STPs.
• Use system circuit breakers.
• Multiple disconnects may be required.
• Isolate each pump at distribution box.
• Refer to MDE-2531, Pump and Dispenser Start-up and Service for OSHA
lock-out/tag-out procedures.
When system battery is present, turn off system battery by pressing CLEAR then ENTER on
manager keypad.
WARNING
!
Dangerous Environment! Failure to
install this equipment in accordance
with NFPA 30A and NFPA 70 could
result in severe injury or death.
Read, understand and follow NFPA
30A and NFPA 70.
OFF
WARNING
Working on dispenser
electronics with power
applied may result in
electrocution and
damage to electronic
components.
Power down unit before
beginning work.
OFF
!