manualshive.com logo in svg

Gilbarco MDE-3664B, Start-Up, Service And Parts Manual, Page: 85 / 131

Share
Download
Gilbarco MDE-3664B Start-Up, Service And Parts Manual Download Page 85

Testing and Troubleshooting

Status Indicators

Page 8-2                                                                                                  MDE-3664B TRIND® Start-up, Service, and Parts Manual · June 2013

The Gateway Board will have the following indicator characteristics when operating properly:

• +5 VDC LED on solid (CR8).
• Blinking Central Processing Unit (CPU) LED (CR6). A dimly lit LED can also indicate 

proper operation because the blink rate becomes so fast that the LED appears dimmer than 
the +5 VDC LED (CR8).

• Rapidly Blinking CRIND A and B LEDs. Side A is CR4 (TX), CR5 (RX), Side B is CR9 

(TX). These LEDs indicate good communication with the CRIND. They mimic the LEDs 
on the series of T17764 CRIND Boards. The Encore 500 Series CRIND node has two 
TRIND LEDs, D12 and D13, present in board under the TRIND connector.

Enhanced Gateway Board (T20678)

Figure 8-2

 shows Status indicators for the Enhanced Gateway Board.

Figure 8-2: Enhanced Gateway Board

CR9

CR8

CR6

CR5

CR4

CR10

CR7

Summary of Contents for MDE-3664B




































































































































Reviews:

No comments